Product Details:
- The industry standard 16” Meat Saws feature all stainless steel unitized welded enclosed base structure with aluminum head structure. A stainless steel head is available at extra cost. The 3334SS is of proven design, durable, and reliable and is applicable to all small, medium, and large supermarkets, and small and medium meat plants. True blade alignment allows excellent blade tracking, giving dependable straight cutting year after year. A broad range of right hand feed and true left hand feed machines are available. There are numerous configurations and optional equipment to select from to meet your exact requirements.
CONSTRUCTION:
- Unitized stainless steel base, tables, leg bolt levelers, carriage channel & supports. Aluminum head and door removable
MOTORS:
HP |
KW |
TYPE |
VOLTS |
AMPS |
CYCLE |
PH |
STATUS |
2 |
1.5 |
HH |
115/208-230 |
21/11.6-10.5 |
60 |
1 |
STD |
2 |
1.5 |
HH |
208-220/440 |
5.9-5.6/2.8 |
50/60 |
3 |
STD |
2 |
1.5 |
TE |
115/208-230 |
21/11.6-10.5 |
60 |
1 |
EC |
2 |
1.5 |
TE |
208-220/440 |
6.3-5.8/2.9 |
50/60 |
3 |
EC |
2 |
1.5 |
TE |
550 |
2.2 |
60 |
3 |
EC |
2 |
1.5 |
HH |
115/208-230 |
28/15-14 |
50 |
1 |
EC |
3 |
2.2 |
TE |
208-220/440 |
9.1-8.6/4.3 |
60 |
3 |
EC |
3 |
2.2 |
TE |
208/380-415 |
8.1/5.8-4.3 |
50 |
3 |
EC |
3 |
2.2 |
TE |
208-230 |
16.8-15.2 |
60 |
1 |
EC |
3 |
2.2 |
TE |
115/230 |
25/12.5 |
50 |
1 |
EC |
3 |
2.2 |
TE |
550 |
3.6 |
60 |
3 |
EC |
5 |
3.7 |
TE WP |
208-220/440 |
14.2-12.9/6.4 |
50/60 |
3 |
EC |
5 |
3.7 |
TE WP |
380-415 |
7.7/7.1 |
50 |
3 |
EC |
3334SS-2HP Std.
Std. = Standard HP = Horsepower EC = Extra Cost WP = Water Proof TEFC= Totally Enclosed Fan Cooled HH = High Humidity
STANDARD EQUIPMENT:
- Two saw blades
- Operation and Safety manual
- Safety wall poster
- End cut safety pusher plate
SWITCH:
- General purpose/Thermal overload
HEAD AND DOOR:
- Aluminum – movable
BASE STRUCTURE:
- Unitized welded, Stainless steel
BLADE STANDARD:
- 124” (3150mm) L x 5/8” (16mm) W x .022 (.5mm) thick, 3 teeth per inch, hard tooth, (two supplied with each saw)
BLADE GUIDE:
- Upper and lower blade backup guides assembly with carbide long-life inserts, removable as an assembly
BLADE TENSION:
- Ratchet arm and cam against pound tested spring and tension spring gauge
BLADE WHEELS:
- 16” (40.24cm) single flange, cast iron, nickel plating, upper wheel assembly removable
BEARINGS:
- Heavy duty tapered roller bearings used in upper wheel hub and lower bearing housing
CATCH PAN:
- Poly Pan, rounded corners, sealed off from other parts of base, accessible through hinged door
CLEANING UNIT:
- Stainless steel body, long-life carbide guide inserts, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjustable as a unit)
DRIVE SYSTEM:
- Non-slip silent v-belt, tension adjustable
LEGS:
- Stainless steel leg bolt levelers
MEAT CARRIAGE:
- S.S. bearings 15-1/2” (394mm) x 23-1/2” (597mm), nylon guides
MEAT GAUGE PLATE:
- Stainless steel faced, adjustable from 1/16” (1.6mm) to 6-1/2” (106.1mm), Locks in position, easy to adjust, entire assembly removable for cleaning
MOTOR COMPARTMENT:
- Sealed off from meat contact areas, easily accessible through removable panel door
PLATTER:
- Held in place with two stainless steel push-pull hold down latches
PUSHER PLATE:
- Safety end cut pusher plate and safety pusher plate storage hanger are supplied as standard equipment
OPTIONS (EC):
- Watertight Magnetic Switch (IPOS)
- Stainless steel movable head and door (IPOS)
- Md. 44 E-Z flow S.S. carriage (IPOS)
- Double saw guide bar
- Stainless steel stationary bar (IPOS)
- Full length S.S. front stationary table (IPOS) (see drwg. 2)
- Meat gauge extended 6” (152mm) past blade IPOS) (one stabilizer req.)
- Cast plated single flange lower removable saw blade wheel (IPOS)
- Cast plated double flange (up & lo) saw blade wheels (IPOS), NOTE: lower saw wheel not removable
- Cast plated double flange (up & lo) removable saw blade wheels (IPOS)
- S.S. single flange (up and lo) saw blade wheels (IPOS), NOTE: lower wheel not removable
- S.S. single flange (up and lo) removable saw blade wheels (IPOS)
- Front table extension 14-3/4” (375mm) x 15-3/4” (400.1mm)
- 3 wire (1 ph.) or 4 wire (3 ph.) 12 ga. Cord less plug (specify length)
- Narrow blade guides (for thin blades)
- Split rear stationary platter (fast blade change) (IPOS)
- Standard length legs with 2-1/4” (57.2mm) disc floor pads (IPOS)
- Longer S.S. hex legs to raise work surface ht. (ck w/rep.) (IPOS) • Drwg. I. Md 3334SS-TL – True left-hand feed, movable S.S. head and door, less thickness gauge plate
- Drwg. 2. Md 3334SS – Trim saw – right to left feed, stationary front table, optional meat gauge assembly
- Drwg. 3. Md 3334SS-TL – Trim saw – True left to right feed, stationary front table, movable S.S. head and door, less meat gauge assembly S.S.=Stainless Steel
- IPOS=in place of standard ht=height inc=includes drwg.=drawing ga.=gauge EC=extra cost NC=no charge
OPTIONS (NC):
- Higher feet per minute saw blade speed (call your Representative)
CERTIFICATION:
- U.L., N.S.F., U.S.D.A., C.S.A., C.F.I.A.
WEIGHT:
- UNCRATED: 464 LBS. (210 KG) CRATED: 538 LBS. (244 KG)
Leave a Reply
Be the first to comment.